Your vehicle with summer tyres is perfectly equipped for most various conditions of the hot season; they are suitable for our warm months in Germany with temperatures above e.g. 7 degrees Celsius, as well as for warmer regions with very mild winters.
A special characteristic of summer tyres is as low rolling resistance as possible, without losing its excellent traction - easy to tell by looking at comparably smooth tyre shoulder and small number of sipes in this area. The profile of summer tyres is directional. The profile depth of summer tyres ranges between 6 and 7 millimetres. However, if the minimum depth of only 1.6 millimetres - as prescribed by law - is obtained, only 10 percent water can absorbed, whereas the water absorption amounts to only 30 percent if the residual profile is 3 millimetres. The profile depth is taken into consideration for minimising the aqaplaning risk.
Optimal driving safety and comfortable handling can be achieved with the aid of summer tyres for the production of which special compounds are used.
Sometimes automatically speedy driving in sunny sections is supported and the traction is maintained even in “sporty” steering. Our experience on test tracks and from racing is very useful for the production and is implemented in a retreaded “King Meiler” tyre for excellent grip, with as low wear as possible - i.e. material loss - and best driving comfort as possible.
Our product series of summer tyres comprises an immense selection - suitable for almost all vehicles.
King-Meiler STREAX
![[Translate to English:] ECE 108](/fileadmin/_processed_/c/0/csm_ECE_108_e9ecef83b8.png "[Translate to English:] none"){kind=small}
The ECE certificate awarded by KBA (Kraftfahrt-Bundesamt - Federal Motor Vehicle and Transport Authority)
authorises the manufacturer of “King Meiler” to produce pneumatic tyres and allows international comparison of compliance with uniform technical requirements. The number issued for this is specific and cannot be interchanged. Many facts can be seen on the ECE number: Number “1” next to “E” indicates the country in which the tests have been carried out. Supplementary “108” indicates that these tyres are retreaded and intended to be used in motor vehicles, i.e. passanger cars and their trailers, while “109” indicates that these tyres are intended to be used in utility vehicles and their trailers.
![[Translate to English:] Prüflabor Nord](/fileadmin/_processed_/2/5/csm_pln_logo_schwarz_faaa74eca5.png "[Translate to English:] none"){kind=logo}
The "Prüflabor Nord" [direct translation: Test Laboratory Nord] accredited by the "Kraftfahrt-Bundesamt" [Federal Motor Vehicle Office] and the "RDW" proves King-Meiler tyres a quality laying above the legal requirements of the ECE 108R and offering tremendous safety in reserve. Owing to extense tests recurring annually King-Meiler tyres carry the quality seal "Approved High Quality Tyres".
![[Translate to English:] DIN ISO 9001:2015](/fileadmin/_processed_/7/c/csm_Qualitaetssiegel-Reifen-deutsch_blau_a681f50669.png "[Translate to English:] none"){kind=small}
DIN ISO 9001:2015
DIN ISO 9001:2015
![[Translate to English:] EU-Reifenlabel](/fileadmin/_processed_/1/e/csm_RH_Pic_Label_WT81_205-55R16_91H_ae84409b6c.jpg "[Translate to English:] middle"){kind=small}
[Translate to English:] EU-Reifenlabel
Das für PKW-Neureifen vorgeschriebene EU-Reifenlabel zeigt Messwerte in 3 Kategorien
Kraftstoffeffizienz/Rollwiderstand (A bis G)
Nasshaftung (A bis G)
externes Rollgeräusch
und gibt damit Aufschluss über die Aspekte Sicherheit, wirtschaftliche Vorteile und Wirkung auf die Umwelt. Für Neureifen Pflicht, für uns Kür: Wir unterziehen unsere King-Meiler dem freiwilligen Produktlabeling in Anlehnung an die ECE R-117. Im Resultat wird sichtbar, dass mit dem Einsatz von Runderneuerten ausschließlich Energie- und Materialressourcen gespart werden. Die Sicherheit bleibt jederzeit gewahrt und unseren hohen Produktionsstandards.
Klick für das Label in großer Ansicht
The King-Meiler STREAX from our premium segment combines the best driving characteristics with a minimum ecological footprint in this high performance…
Sport1
The ECE certificate awarded by KBA (Kraftfahrt-Bundesamt - Federal Motor Vehicle and Transport Authority)
authorises the manufacturer of “King Meiler” to produce pneumatic tyres and allows international comparison of compliance with uniform technical requirements. The number issued for this is specific and cannot be interchanged. Many facts can be seen on the ECE number: Number “1” next to “E” indicates the country in which the tests have been carried out. Supplementary “108” indicates that these tyres are retreaded and intended to be used in motor vehicles, i.e. passanger cars and their trailers, while “109” indicates that these tyres are intended to be used in utility vehicles and their trailers.
The "Prüflabor Nord" [direct translation: Test Laboratory Nord] accredited by the "Kraftfahrt-Bundesamt" [Federal Motor Vehicle Office] and the "RDW" proves King-Meiler tyres a quality laying above the legal requirements of the ECE 108R and offering tremendous safety in reserve. Owing to extense tests recurring annually King-Meiler tyres carry the quality seal "Approved High Quality Tyres".
DIN ISO 9001:2015
DIN ISO 9001:2015
The new Sport1 transmits optimal engine performance of your car on the road. Sportiness and power are perfectly utilised. Excellent adhesion up to the…
Sport3
The ECE certificate awarded by KBA (Kraftfahrt-Bundesamt - Federal Motor Vehicle and Transport Authority)
authorises the manufacturer of “King Meiler” to produce pneumatic tyres and allows international comparison of compliance with uniform technical requirements. The number issued for this is specific and cannot be interchanged. Many facts can be seen on the ECE number: Number “1” next to “E” indicates the country in which the tests have been carried out. Supplementary “108” indicates that these tyres are retreaded and intended to be used in motor vehicles, i.e. passanger cars and their trailers, while “109” indicates that these tyres are intended to be used in utility vehicles and their trailers.
The "Prüflabor Nord" [direct translation: Test Laboratory Nord] accredited by the "Kraftfahrt-Bundesamt" [Federal Motor Vehicle Office] and the "RDW" proves King-Meiler tyres a quality laying above the legal requirements of the ECE 108R and offering tremendous safety in reserve. Owing to extense tests recurring annually King-Meiler tyres carry the quality seal "Approved High Quality Tyres".
DIN ISO 9001:2015
DIN ISO 9001:2015
The new Sport3 tyres drive off the water excellently and thus ensures perfect handling when on wet roads. Even in curves and on dry roads, these tyres…
HPZ
The ECE certificate awarded by KBA (Kraftfahrt-Bundesamt - Federal Motor Vehicle and Transport Authority)
authorises the manufacturer of “King Meiler” to produce pneumatic tyres and allows international comparison of compliance with uniform technical requirements. The number issued for this is specific and cannot be interchanged. Many facts can be seen on the ECE number: Number “1” next to “E” indicates the country in which the tests have been carried out. Supplementary “108” indicates that these tyres are retreaded and intended to be used in motor vehicles, i.e. passanger cars and their trailers, while “109” indicates that these tyres are intended to be used in utility vehicles and their trailers.
The "Prüflabor Nord" [direct translation: Test Laboratory Nord] accredited by the "Kraftfahrt-Bundesamt" [Federal Motor Vehicle Office] and the "RDW" proves King-Meiler tyres a quality laying above the legal requirements of the ECE 108R and offering tremendous safety in reserve. Owing to extense tests recurring annually King-Meiler tyres carry the quality seal "Approved High Quality Tyres".
DIN ISO 9001:2015
DIN ISO 9001:2015
The HPZ is most state-of-the-art expertise from racing. Maximum safety due to large contact surface. Shorter braking distance + better handling when…
Eco
The ECE certificate awarded by KBA (Kraftfahrt-Bundesamt - Federal Motor Vehicle and Transport Authority)
authorises the manufacturer of “King Meiler” to produce pneumatic tyres and allows international comparison of compliance with uniform technical requirements. The number issued for this is specific and cannot be interchanged. Many facts can be seen on the ECE number: Number “1” next to “E” indicates the country in which the tests have been carried out. Supplementary “108” indicates that these tyres are retreaded and intended to be used in motor vehicles, i.e. passanger cars and their trailers, while “109” indicates that these tyres are intended to be used in utility vehicles and their trailers.
The "Prüflabor Nord" [direct translation: Test Laboratory Nord] accredited by the "Kraftfahrt-Bundesamt" [Federal Motor Vehicle Office] and the "RDW" proves King-Meiler tyres a quality laying above the legal requirements of the ECE 108R and offering tremendous safety in reserve. Owing to extense tests recurring annually King-Meiler tyres carry the quality seal "Approved High Quality Tyres".
DIN ISO 9001:2015
DIN ISO 9001:2015
The ability to adapt at high speed, as well as when braking and accelerating is the eco. Precise handling in the curves due to the arrangement of the…
HT2
The ECE certificate awarded by KBA (Kraftfahrt-Bundesamt - Federal Motor Vehicle and Transport Authority)
authorises the manufacturer of “King Meiler” to produce pneumatic tyres and allows international comparison of compliance with uniform technical requirements. The number issued for this is specific and cannot be interchanged. Many facts can be seen on the ECE number: Number “1” next to “E” indicates the country in which the tests have been carried out. Supplementary “108” indicates that these tyres are retreaded and intended to be used in motor vehicles, i.e. passanger cars and their trailers, while “109” indicates that these tyres are intended to be used in utility vehicles and their trailers.
The "Prüflabor Nord" [direct translation: Test Laboratory Nord] accredited by the "Kraftfahrt-Bundesamt" [Federal Motor Vehicle Office] and the "RDW" proves King-Meiler tyres a quality laying above the legal requirements of the ECE 108R and offering tremendous safety in reserve. Owing to extense tests recurring annually King-Meiler tyres carry the quality seal "Approved High Quality Tyres".
DIN ISO 9001:2015
DIN ISO 9001:2015
Designed to meet the strictest requirements of economy and ecology. The HT2 performs excellently on dry + on wet + on slippery roads. Its profile with…
KMMHT
The ECE certificate awarded by KBA (Kraftfahrt-Bundesamt - Federal Motor Vehicle and Transport Authority)
authorises the manufacturer of “King Meiler” to produce pneumatic tyres and allows international comparison of compliance with uniform technical requirements. The number issued for this is specific and cannot be interchanged. Many facts can be seen on the ECE number: Number “1” next to “E” indicates the country in which the tests have been carried out. Supplementary “108” indicates that these tyres are retreaded and intended to be used in motor vehicles, i.e. passanger cars and their trailers, while “109” indicates that these tyres are intended to be used in utility vehicles and their trailers.
The "Prüflabor Nord" [direct translation: Test Laboratory Nord] accredited by the "Kraftfahrt-Bundesamt" [Federal Motor Vehicle Office] and the "RDW" proves King-Meiler tyres a quality laying above the legal requirements of the ECE 108R and offering tremendous safety in reserve. Owing to extense tests recurring annually King-Meiler tyres carry the quality seal "Approved High Quality Tyres".
DIN ISO 9001:2015
DIN ISO 9001:2015
The KMMHT combines excellent characteristics on wet and dry roads. Furthermore, they are characterised by high mileage performance and low rolling…
A3
The ECE certificate awarded by KBA (Kraftfahrt-Bundesamt - Federal Motor Vehicle and Transport Authority)
authorises the manufacturer of “King Meiler” to produce pneumatic tyres and allows international comparison of compliance with uniform technical requirements. The number issued for this is specific and cannot be interchanged. Many facts can be seen on the ECE number: Number “1” next to “E” indicates the country in which the tests have been carried out. Supplementary “108” indicates that these tyres are retreaded and intended to be used in motor vehicles, i.e. passanger cars and their trailers, while “109” indicates that these tyres are intended to be used in utility vehicles and their trailers.
The "Prüflabor Nord" [direct translation: Test Laboratory Nord] accredited by the "Kraftfahrt-Bundesamt" [Federal Motor Vehicle Office] and the "RDW" proves King-Meiler tyres a quality laying above the legal requirements of the ECE 108R and offering tremendous safety in reserve. Owing to extense tests recurring annually King-Meiler tyres carry the quality seal "Approved High Quality Tyres".
DIN ISO 9001:2015
DIN ISO 9001:2015
The A3 impresses with its long service life. Lower fuel consumption is friendlier for the environment and increases the efficiency. High safety on wet…
KMMHH3
The ECE certificate awarded by KBA (Kraftfahrt-Bundesamt - Federal Motor Vehicle and Transport Authority)
authorises the manufacturer of “King Meiler” to produce pneumatic tyres and allows international comparison of compliance with uniform technical requirements. The number issued for this is specific and cannot be interchanged. Many facts can be seen on the ECE number: Number “1” next to “E” indicates the country in which the tests have been carried out. Supplementary “108” indicates that these tyres are retreaded and intended to be used in motor vehicles, i.e. passanger cars and their trailers, while “109” indicates that these tyres are intended to be used in utility vehicles and their trailers.
The "Prüflabor Nord" [direct translation: Test Laboratory Nord] accredited by the "Kraftfahrt-Bundesamt" [Federal Motor Vehicle Office] and the "RDW" proves King-Meiler tyres a quality laying above the legal requirements of the ECE 108R and offering tremendous safety in reserve. Owing to extense tests recurring annually King-Meiler tyres carry the quality seal "Approved High Quality Tyres".
DIN ISO 9001:2015
DIN ISO 9001:2015
The KMMHH3 is a sports tyre with perfect steering precision. It offers a stable banking in curves and high safety reserves. Very good on wet and dry…
KMHCA
![[Translate to English:] ECE 108](/fileadmin/_processed_/6/6/csm_ECE_109_9177db622d.png "[Translate to English:] none"){kind=small}
The ECE certificate awarded by KBA (Kraftfahrt-Bundesamt - Federal Motor Vehicle and Transport Authority)
authorises the manufacturer of “King Meiler” to produce pneumatic tyres and allows international comparison of compliance with uniform technical requirements. The number issued for this is specific and cannot be interchanged. Many facts can be seen on the ECE number: Number “1” next to “E” indicates the country in which the tests have been carried out. Supplementary “108” indicates that these tyres are retreaded and intended to be used in motor vehicles, i.e. passanger cars and their trailers, while “109” indicates that these tyres are intended to be used in utility vehicles and their trailers.
DIN ISO 9001:2015
DIN ISO 9001:2015
The KMHCA is characterised by an excellent traction + wet and dry road grip. It offers a high safety reserve and reduces the risk of aquaplaning.
KMMHV3
The ECE certificate awarded by KBA (Kraftfahrt-Bundesamt - Federal Motor Vehicle and Transport Authority)
authorises the manufacturer of “King Meiler” to produce pneumatic tyres and allows international comparison of compliance with uniform technical requirements. The number issued for this is specific and cannot be interchanged. Many facts can be seen on the ECE number: Number “1” next to “E” indicates the country in which the tests have been carried out. Supplementary “108” indicates that these tyres are retreaded and intended to be used in motor vehicles, i.e. passanger cars and their trailers, while “109” indicates that these tyres are intended to be used in utility vehicles and their trailers.
The "Prüflabor Nord" [direct translation: Test Laboratory Nord] accredited by the "Kraftfahrt-Bundesamt" [Federal Motor Vehicle Office] and the "RDW" proves King-Meiler tyres a quality laying above the legal requirements of the ECE 108R and offering tremendous safety in reserve. Owing to extense tests recurring annually King-Meiler tyres carry the quality seal "Approved High Quality Tyres".
DIN ISO 9001:2015
DIN ISO 9001:2015
The KMMHV3 is designed to provide the best driving comfort on wet and dry roads. Its excellent driving and suspension comfort is achieved thanks to…
Flyer Sortiment Sommer
In unserem Flyer finden Sie alle King-Meiler Sommerreifen mit detaillierten Erläuterungen zu all ihren Attributen, die sie mitbringen. Wählen Sie aus…